MonTech General Catalogue MonTech Specimen and Die cutting

Product
Brochures

MV 3000 Basic

ISO 289:2018 ASTM D 1646 DIN 53523 BS 903: Part 58 AFNOR T43-00/005 BS 1673 GOST 10722-76 JIS K6300 TGL 25-689

A rotational shear viscometer according to Mooney for performing Viscosity tests (ML / MS 1+X), Stress Relaxation testing, Mooney Scorch, Delta Mooney testing on polymers as well as rubber compounds for quality control, research and development applications.

  • Instrument description

    MV 3000 Basic

    Rotor speed
    2 turns per minute

    Entry level Mooney Viscometer

    The MV 3000 Basic is a rotational shear viscometer according to Mooney for performing

    – Viscosity tests (ML / MS 1+X)
    – Stress Relaxation testing
    – Mooney Scorch
    – Delta Mooney testing

    on polymers as well as rubber compounds for quality control, research and development applications.

    The MV 3000 Basic is supplied as a complete, ready-to-test instrument set including a personal computer, MonControl Software, cables, connectors and regulators as well as a standard set of tools and consumables.

    Easy to use:
    All test parameters are pre-programmed through the MonControl Software – the instrument is equipped with a single button for starting the test sequence.

    Direct feedback:
    An integrated multi-color LED status bar clearly displays the current machine state.

    Rugged:
    The compact and highly rigid frame is made from high strength aluminum. Along with direct-drive technology, this guarantees stable and accurate test results in every environment.

    Rotor, die assembly and drive system

    The most fundamental and important parts on a Mooney Viscometer are the rotor, die assembly and in-line drive shaft. The test sample is placed below and above the rotor with optional test film. Then the upper die is lowered onto the lower die with a force of 11.5 kN.

    After a pre-heat time, the rotor – which is now totally embedded in the test material in the closed die cavity – rotates at a fixed speed of 2 turns per minute, powered by an in-line drive system.

    During the whole test sequence, the temperatures of both dies are measured by a separate precision probe on each die and the heaters are accordingly controlled and regulated to precisely maintain the temperature at its setpoint.

    The torque needed to turn the rotor in the test material is precisely measured by an in-line torque transducer. Torque in Mooney Units (MU), die temperatures and rotor speed are recorded. Data is automatically calculated and displayed once the test is completed.

  • Applications
  • Technical Specification
  • Options
Specific Standard and Application Search

With our intelligent application and standard search you can find products for applications and DIN, ISO, ASTM, BS, AFNOR, JIS and TGL standards in a few seconds.