Features
Ease of Maintenance
- Snap-in Components
- Simple and rugged mechanics
Ease of Use
- Single Button Operation
- Fully automated calibration
- Guided operation sequence
- LED workroom lights
Applicable Data Measurement
- Density
- Volume change
Densimeter for testing of individual samples with automated test sequence and internal self-calibration
Features
Ease of Maintenance
Ease of Use
Applicable Data Measurement
The MonTech DM 3000 is a semi automated Densimeter.
The compact instruments is designed for rapid and accurate determination of specific gravity – with a simplifi ed, software guided operation up to 4 tests per minute can be performed.
The Densimeter utilizes the hydro-static method by comparing the weight of the sample in air as well as in an immersion liquid.
The operator simply hangs the sample from the balance and pushes the start button. A micro-processor then weighs the sample in air, automatically raises a beaker with the immersion liquid, takes the weight of the sample in the immersion liquid and lowers the beaker. This whole process is software guided and once the procedure is completed the density is displayed. Additionally the sample weight in air, weight in water, and the weight diff erence are also recorded and reported.
Hydro-static weighing method
Density, Volume change
Weighing range
1.000 to 50.000 grams
0.50 – 10.00 g/cm³ (lower density range possible with anti-float or needle holder)
ASTM D 297, ISO 2781, BS903
1 Milligram / Better than ± 0.020%
English, French, German, Russian (others on request)
Serial (RS232), USB 2.0 optional
100 - 260 VAC +/- 10%, 50/60 Hz +/- 5 Hz, 2 amp single phase
Needle type sample holder / Anti float bracket / Set of calibration weight / USB 2.0 interface adaptor
With our intelligent application and standard search you can find products for applications and DIN, ISO, ASTM, BS, AFNOR, JIS and TGL standards in a few seconds.