MonTech’s MCool -40°C Greatly Increases Range for Low Temperature RPA Testing | MonTech Rubber Testing Solutions

Menu

Moving Die Rheometer 5 Instruments
Moving Die Rheometers are the standard testing method for characterisation of rubber curing in quality control as well as research and development.
Mooney Viscosimeter 3 Instruments
Mooney Viscometers are the backbone for testing the viscous flow of raw materials such as polymers and intermediates such as masterbatches for maintaining stable and consistent manufacturing processes.
Bale Cutters 3 Instruments
The laboratory bale cutters provides the most convenient solution to cut and slice polymers bales, blocks and rubber sheets.
Dispersion 4 Instruments
Carbon black dispersion tester – Computer aided, advanced digital reflected light microscopy brought to the next level.
Cutting knives and Dies 1 Instrument
Density 3 Instruments
Test instrument for measurements of the density of rubber mixtures.
Fatigue 1 Instrument
State of the art fatigue testing and lifecycle simulation instrument.
Hardness 7 Instruments
Test instrument for measurements of the shore hardness and the density of rubber mixtures.
Die and Sample cutting 4 Instruments
MonTech offers a wide range of sample cutters equipment for every need.
Ageing 2 Instruments
Online Testing Cell 1 Instrument
The most advanced and fully automated testing solution for high capacity mixers
Rebound Resilience 1 Instrument
Automatic Schob pendulum impact elasticity tester for elastomers and foams
Plasticity 2 Instruments
The MonTech Rapid Plastimeter measures the plasticity, flow and viscosity of polymers and unvulcanized rubbers. The instrument is typically used in conjunction with the MonTech Ageing oven AO 3000 for plasticity testing to determine the Plasticity Retention Index (PRI) of raw natural rubbers.
Compression set 2 Instruments
Compression set fixtures enable measurements of a rubber compound’s ability to return to its original thickness after prolonged compressive stresses.
Specimen preparation 3 Instruments
MonTech offers a wide range of sample cutters and specimen preparation equipment for every need.
Abrasion 2 Instruments
Laboratory press 7 Instruments
The MonTech VP 3000 and LP 3000 are specifically designed for rubber applications and have evolved into the international standard in laboratory presses in the rubber industry.

MonTech General Catalogue MonTech Specimen and Die cutting

Product
Brochures

29. October 2020

MonTech’s MCool -40°C Greatly Increases Range for Low Temperature RPA Testing

MonTech RPA now reaches -40°C for advanced post-cure testing

The MonTech MCool -40°C is an advanced external liquid cooling system for use in the D-RPA 3000 and MDR 3000 Professional. It is perfect for testing where extreme low temperatures
are required, approaching glass transition temperature. The system works in conjunction with the pneumatic cooling system and cools both dies individually, reaching temperatures as low as -40°C (-40°F). This patented cooling system serves as an addition to the instrument’s temperature control, leaving the existing heating system in the dies unchanged and fully operational. All instruments equipped with the MCool -40°C cooling system maintain full functionality of a Moving Die Rheometer or Rubber Process Analyzer

For more information about the Rubber Process Analyzer and the MCool -40°C Chilled Air Cooling System, click here.